|
BE
RESPONSIBLE! TEST DROP YOUR FIRE DOOR!
It's
the law!!
The
1999 NJ Uniform Fire Code has now adopted both NFPA 80 Code #15-2.4.3
and BOCA Fire Prevention Code under NJ Uniform Fire Code #F-303.4.3 Testing:
"Horizontal or vertical sliding and rolling fire doors shall be inspected
and tested at least annually by the owner to check for proper operation
and full closure. Resetting of the release mechanism shall be done in
accordance with the manufacturer's written instructions. A written record
of the results of the inspection and testing shall be maintained and made
available to the fire official."
Note
to owner: NFPA-80 and Model Codes require the annual testing of rolling
fire doors to demonstrate proper operation and full closure. Resetting
of the release mechanism must be done in accordance with the manufacturer's
instructions. A written record must be maintained and made available to
the authority having jurisdiction. NFPA-80 also requires that when damage
impairs the door's proper emergency function that it be repaired with
parts obtained from the original door's manufacturer and upon completion
of repairs that the door be tested to assure emergency operation and closing.
WARNING:
Severe injury or death may result through improper attempts at drop testing,
repair and/or maintenance.
Drop testing, repair and/or maintenance should be performed by qualified
personnel with a complete knowledge and understanding of this type of
door.
Before drop testing, conduct a visual inspection for damaged or
missing parts that may create a hazard during testing or affect proper
operation or resetting. Verify proper installation. Open and close the
door to check for correct spring tenstion.
|
